Refreshed NASCAR R5P7 Race Engine 358 c/i
SKU:
hmi-r5p7-rge
In Stock:
Yes
You must add to cart to see the price
Refreshed NASCAR R5P7 Race Engine 358 c/i
This is a refreshed lease return engine. R5 Block P7 Aluminum Cylinder Head, Producing 800 + Horsepower, CNC Ported Cylinder Heads and Intake Manifold, Complete with Dry Sump, Stainless Steel pan and lines, bell housing and clutch, Bryant Crank, Carrillo Connecting Rods, JE Forged Pistons, Jesel Rocker ArAvailable with rollers lifter or flat tappet cams depending on past use of engine with NEXTEL CUP or CRAFTSMAN TRUCK SERIES.
R5 Block P7 Aluminum Cylinder Head, Producing 800 + Horsepower, CNC Ported Cylinder Heads and Intake Manifold, Complete with Dry Sump, Stainless Steel pan and lines, bell housing and clutch, Bryant Crank, Carrillo Connecting Rods, JE Forged Pistons, Jesel Rocker Arms.
This is a refreshed lease return engine. R5 Block P7 Aluminum Cylinder Head, Producing 800 + Horsepower, CNC Ported Cylinder Heads and Intake Manifold, Complete with Dry Sump, Stainless Steel pan and lines, bell housing and clutch, Bryant Crank, Carrillo Connecting Rods, JE Forged Pistons, Jesel Rocker ArAvailable with rollers lifter or flat tappet cams depending on past use of engine with NEXTEL CUP or CRAFTSMAN TRUCK SERIES.
R5 Block P7 Aluminum Cylinder Head, Producing 800 + Horsepower, CNC Ported Cylinder Heads and Intake Manifold, Complete with Dry Sump, Stainless Steel pan and lines, bell housing and clutch, Bryant Crank, Carrillo Connecting Rods, JE Forged Pistons, Jesel Rocker Arms.
- Cylinders-8
- Horsepower-800 +
- Torque-345 lb/ft.
- Drive Type Code-RWD
- Type-Overhead Valves (OHV)
- Size-5.8L
- Type-Gas
- Valves-16
Block preparation work on this engine includes:
- Pressure Test Oil Gallies
- Lighten Cylinder Block
- Drill and Tap Spray Bar
- Groove Rear Cam
- Drill Rear Cam
- De-burr Cylinder Heads
- Drain Between Lifters
- Check Oil Feed in Front Cam Bore
- Drill and Tap Fuel Pump Squirter
- Counter-bore Cylinders
- Bake Cylinder Block
- Enlarge Lifter Bores
- Finish Deburr
- Tap all Bolt Holes
- Hone Main Bore
- Hone Cam Bore
- Hone Lifter Bores
- Install Lister Bushings
- Hone Lifter Bushings
- Install Distributor Bushings and Size
- Pre-torque Head Studs
- Hone Cylinders
Ships by freight from Martinsville, Virginia, home of the our testing and proving-ground, Martinsville Speedway, the favorite short track of NASCAR.
